Table of Contents
Advertisement
Loading Paper
1. Slide the tray out of the printer.
paper gauge
The paper gauge indicates how much paper remains in the tray.
2. Adjust the paper guides for the paper size you are using.
OKIPAGE 10ex User's Guide
1
3. Fan a stack of paper (Maximum 250 sheets, 20 lb.) and place it in
the tray under the tabs. Do not fill above the "PAPER FULL"
mark. To use letterhead, place paper print side down, top-edge
facing you.
Recommended paper weight for the tray is 16 to 28 lb (60 to 105
g/m
2
)
.
.
4. Place the tray back into the printer until it locks.
Using Legal Size Paper
To load legal size paper, open out the tray extender and adjust the rear
paper guide.
guide
Setting Up Your Printer
Paper Full mark
5
Advertisement
Table of Contents
