Start > Status Pages - Kyocera TASKalfa 8000i User Manual

Settings Pages
Start > Status Pages
6-2
This indicates the device's model, serial number, asset number, firmware
information, etc.
Device Settings
This shows whether the administrator password is defined, the language the
embedded server is displayed in, and the status of Auto Sleep, A4-Letter
override, and Auto Error.
Device Options
This provides you with the information on installation of optional hardware
equipment, such as a document processor.
Printer Settings
System information on the printing system is displayed, allowing you to verify
the resolution, number of copies, gloss mode, EcoPrint mode, etc.
Time
This shows the time of day set in the printing system.
Media Input
This shows the size and media type for the paper loaded in the MP tray and
the cassettes.
Document Output
This shows stack mode of each paper output devices. Face down delivers
printed pages in forward order, whereas, Face up delivers printed pages in
reverse order.
Memory
This shows the total memory installed in the printing system in megabytes.
Advanced Options
This provides you with the information on advanced features currently
installed in the printing system. This includes Security Kit, Fax Kit, Card
Reader, etc.
These pages allow you to verify the various settings (device, printing, scanning,
network and E-mail) that were made on the operation panel or using the
embedded server.
It is divided by the following items.
• Network
• Security
• Device/Printer
• Scanner
• FAX/i-FAX
• Counters
Network > General
This allows you to verify the current settings for LDAP, TCP/ IP, IPP, IPP
over SSL, AppleTalk, NetBEUI, IPv4, and IPv6. For more information, refer
to Advanced Page
Network > IP Filters
on page 6-29.
User Guide