Kyocera TASKalfa 8000i User Manual page 44

Settings Pages
6
7
8
9
10
11
Settings for Applying the Same Forwarding Process without Using a
Requirement List
1
2
3
4
6-22
• Save to FAX Box
Specifies whether to save faxes in a FAX Box. This is not stored in the FAX
Box if the forwarding conditions do not meet.
• Box Name
Specifies the FAX Box to be used. When the selection button is clicked, a list
of registered FAX Boxes appears. The FAX Box to be specified here must be
registered in advance. For how to add a FAX Box, refer to
4-5.
After you have finished setting all items, click Submit.
The screen returns to the Detail/Edit page. After you have finished setting all
items, click Submit.
The Requirement List page appears. Check that the status of the condition you
have set is On. Repeat the above steps to set more conditions.
Finally, set the process for faxes that do not satisfy any of the conditions on the
Requirement List. Click Advanced of Not complying with the requirements.
The Requirement List - Advanced page appears. Set whether to execute
forwarding processes for faxes satisfying no conditions by setting the status to
On or Off. When this item is set to On, set the subsequent items. The procedure
is almost the same as the procedure for adding a condition. See steps 2 to 6 as
a reference.
After you have finished setting the items, click Submit.
This completes the settings for forwarding processes using a Requirement
List.
Open the FAX/i-FAX > Common > RX/Forward Requirements > General
page.
Click Advanced in RX/Forward Requirements.
The RX/Forward Requirements - Advanced page appears. Specify the
forwarding process. The procedure is almost the same as the procedure for
adding a condition. See steps 2 to 6 as a reference.
Note: The process of saving faxes in a FAX Box cannot be selected as the
forwarding process to be applied without using a Requirement List.
After you have finished setting the items, click Submit.
Returns to the RX/Forward Requirements page. Select ALL and click Submit.
This completes the settings for applying the same forwarding process without
using a Requirement list.
FAX Box on page
User Guide