Table of Contents
Advertisement
Max. Frame Rate
Mobil Settings
Enable Mobil
Streaming
Resolution
Video Quality
Control
Max. Frame Rate
Access Code
Video Adjustment
Power Line
Frequency
White Balance
Brightness
Sharpness
Options
Microphone
Audio Type
Speaker
Time Stamp
Text Display
Select the desired Maximum bandwidth for the video stream.
Note that you can specify EITHER the Bandwidth OR the
Frame Rate, not both. If the Bandwidth is defined, the frame
rate will be adjusted as necessary to achieve the specified
frame rate.
The default value for bandwidth is Unlimited, which allows
you to specify the desired frame rate.
Enable streaming video for the mobile device by checking this
checkbox.
The default resolution is set to 160x120.
•
Constant Bit Rate: Select the desired fix bit rate.
•
Fixed Quality: Select the desired option. The default fix
quality is set to Normal.
Select the desired Maximum bandwidth for the video stream.
Enter the code for accessing the live video from camera
through cell phone connection.
Select the power line frequency (50Hz or 60Hz) used in your
region, to improve the picture quality under florescent lighting.
Select the desired option to match the current environment
and lighting.
If necessary, you can adjust the brightness to obtain a better
image. For example, if the camera is facing a bright light, the
image may be too dark. In this case, you can increase the
brightness.
Select the desired option for the sharpness. You can select a
Sharpness value between -3 and 3.
Enable audio by checking this checkbox. Using Audio will
increase the bandwidth requirements slightly.
Select the desired audio type.
Enable speaker sound by checking this checkbox.
If enabled, the current time will be displayed on the Video
image.
Enable this setting if you want text to be displayed on the
Video image, and enter the desired text - up to 20 characters.
This feature is often used to identify each camera when
multiple cameras are installed.
19
Advertisement
Table of Contents
