WWW.FOSCAM.COM
The following errors may occur:
1) Can not connect to the server. Check if the FTP Server is correct.
2) Network Error. Please try later.
3) Server Error.
4) Incorrect user or password. Check the username and password.
5) Cannot access the folder. Verify the folder exists and your account is authorized
6) Error in PASV mode. Verify the server supports PASV mode.
7) Error in PORT mode. PASV mode should be selected if the device is behind a NAT.
8) Cannot upload file. Verify your account is authorized
Check parameters. The format of image is similar to
00606E8C1930(sarah)_0_20100728114350_25.jpg
Check if your FTP server supports this file name format.
3.13 Alarm Service Settings
If you enable Motion Detect Armed, it will send email alerts and upload images when motion
has been detected.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 3.24
Select it
If the number is bigger and the
sensibility is higher
This will reduce false alarms such as light
changes.
Figure 3.25
FI8910/FI8910W User Manual
34