NVR User Manual
Parameter
Resolution
Transparency
Mouse Sensitivity
Alarm Settings
【Motion Detection】
Follow the steps to set the motion detection parameters. In the live view mode, once a
motion detection event takes place, the NVR can analyze it and perform many actions to
handle it. Enable motion detection function can trigger certain channels to start recording,
or trigger full screen monitoring, output alarm, send Email, upload figure to FTP, buzzer
alarm and so on.
In the live view mode, there are icons at the right bottom of the screen for each channel.
The Icon
The Icon
In this chapter, you can follow the steps to schedule a record which triggered by the
detected motion.
Choose "Menu > Settings > Alarm Settings > Motion Detection" in the Menu interface. The
Motion Detection interface is displayed.
www.foscam.com
Description
The output resolution of the NVR.
Configure the transparency of the NVR output interface.
Configure the sensitivity of the mouse.
indicate alarm was triggered.
indicate the IPC is recording.
34