Motorola RDU2080d User Manual page 94

Programmable Via
RADIO PANEL
Features
Display
IVOX,
sensitivity Yes
Level
Keypad Beep (
or Keypad Yes
Tone) (2)
Keypad Lock
Yes
(2)
LEDs Enabled/
No
Disabled
Low Battery
Alert – N/A
Shutdown
Maximum
Yes
Channels (2)
92
Programmable via
CPS
Non- Non-
Display
Display Display
N/A Yes N/A
Yes Yes Yes
N/A Yes N/A
No Yes Yes
N/A N/A N/A
No Yes Yes
Default Value
Available for Display models only. Allows user to
HIGH
specify IVOX sensitivity level. For front panel radio
(Level 3)
programming use the MENU button.
Press SB2 while turning ON radio to enable/disable
ON
keypad beep.
Press and hold MENU for 4 seconds to lock the
UNLOCKED
radio keypad.To unlock, press MENU for 4 seconds.
Using CPS you can disable radio LEDs.
Enabled
Gives a sequence of loud and high beep tones to
ON alert battery level is low. LED will blink orange
several times. This a non-programmable feature.
Front panel radio programming (only Display
models): Set radio to Programming Mode(1) to get
Model and CPS
the Maximum Channels Menu option.
programmable
dependant
Note: Default value is set to the maximum number
of channels that the radio supports.
Programming Tips