Motorola RDU2080d User Manual page 62

To program the CTCSS/DPL code, scroll
through the programming options by short
pressing the PTT button until your radio display
shows:
To program the desired code, scroll using
buttons until you get the desired CTCSS/
DPL code value. Long press the PTT button to
exit and save or short press the PTT button to
go to the next programming feature without
saving.
60
English
T
X
To program the Bandwidth TX scroll down/up
with the /
following screen:
T
X
To program the desired bandwidth (HI = 25
kHz, LOW = 12.5 kHz), toggle the
buttons to select the value. Long press the PTT
/
button to exit and save or short press the PTT
button to go to the next programming feature
without saving.
Note: If the value of the bandwidth can not be
changed, the setting will be displayed solidly
buttons until you get the
BW
/