Connect The Cable And Cord - ClearSounds A100 User Manual

Setup

Connect the cable and cord

To connect the cable and cord
1.
Connect one end of the telephone cable to the
port on the base, and connect the other end to
the telephone communication jack in the wall.
2. Connect one end of the AC power adapter cord
to the power port on the base, and connect the
adapter to the AC power outlet in the wall.
If you subscribe to DSL telephone service
If you hear noise during conversations or if the
Caller ID function does not work properly, please
obtain and attach a DSL noise filter.
Attach the filter between the telephone cable and
the telephone communication jack in the wall.
12
Telephone cable
AC power adapter and cord