Table of Contents
Advertisement
5.
Switch the unit on and turn the mirror carriage mode off:
(a)
Press the Setup button on the control panel.
(b)
Touch the Admin Setup button and enter the admin password (the default is
aaaaaa). Refer to "Pre-configuration Information" on page 25.
(c)
Touch the User Install button.
(d)
Using the right hand arrow button, navigate to Mirror Carriage mode. Touch
the Mirror Carriage mode button and follow the on-screen instructions to
unlock.
Power Save Mode
If you do not use the unit for a while, the machine will enter the power save mode to control
the power consumption of the device. To cancel or initiate the power save mode, press the
Power Save button on the control panel.
Switching Off
Do not turn off the power switch suddenly as this may damage your
unit. Always follow the correct procedure to ensure that no HDD
data is lost.
1.
Press the Setup button on the control panel.
2.
Press the ShutDown button.
3.
Press Yes to continue.
4.
At the prompt, turn the power switch OFF.
CAUTION!
Getting started > 16
Advertisement
Table of Contents
