Table of Contents
Advertisement
Scan to Remote PC
NOTE
This feature is only available when you connect to your MFP via USB.
NOTE
After Remote PC is selected, user action is performed at your PC (Pull Scan).
NOTE
• The instructions below use PaperPort
machine) as an example. If you use an alternative application, the
instructions and user interface will differ.
• Only the basic instructions are included here; for full instructions on how
to use PaperPort 11 SE, refer to the documentation that accompanies the
utility.
1.
At the MFP: From the Scan Ready screen, press the Remote PC option.
2.
Place the document face DOWN on the document glass or face UP in the ADF.
3.
At your PC: Start your scanning application.
4.
Select the File menu and choose Scan or Get Photo.
A dialogue box with a list of scanning sources displays.
5.
Select TWAIN: OKI CX2633 Twain.
You need to select the source only once, unless you want to choose another scanner.
6.
Select a profile. Choose from:
(a)
B&W Document.
(b)
Grayscale Document.
(c)
Color Document.
(d)
Color Photograph.
®
11 SE (supplied with your
Operation > 107
Advertisement
Table of Contents
