Security - Shuttle SX79R5 User Manual



Security

Select the Security tab from the BIOS setup screen to enter the Security BIOS Setup
screen. You can display an Security BIOS Setup option by highlighting it using the
<Arrow> keys. All Security BIOS Setup options are described in this section.
The Security Setup screen is shown below. The sub menus are documented on the
following pages.
・Change Supervisor Password
When this item is selected, a message box shall appear on the
screen as below:
Flash Write Protection
Enables/Disables Flash Write Protection control function.
 The choice: Enabled , Disabled.
Type a maximum of 6-digit password and press [Enter]. The password typed now will
replace any previously set password from CMOS memory. You may also press [ESC] to
abandon new password setting.
When the Supervisor Password is set, new items Change User Password and Password
Check will be added in the menu.
Enter New Password
7