Adding Pci Add-On Cards - Supero SuperServer 1026GT-TF User Manual

S S
UPER ERVER 1026GT-TF Series User's Manual
Populating DIMMs for Optimal Performance
3 DIMMs
Populating DIMMs for Optimal Performance
3 DIMMs
Populating DIMMs for Optimal Performance
Branch 0
6 DIMMs P1-DIMM1A P1-DIMM2A
5-6

Adding PCI Add-On Cards

The 1026GT-TF (without GPUs installed) can support two PCI-E 2.0 cards via riser
cards installed in the x16 slots and one low-profi le PCI-E 2.0 x4 card.
The 1026GT-TF-FM105 and 1026GT-TF-FM107 server can (in addition to one
NVIDIA Fermi GPU card) support one low-profi le PCI-E 2.0 x4 card and two standard
size PCI-E 2.0 x8 cards using riser cards.
The 1026GT-TF-FM205 and 1026GT-TF-FM207 server can (in addition to two
NVIDIA Fermi GPU cards) support one low-profi le PCI-E 2.0 x4 card using a riser
card.
Installing an Add-on Card
1. Begin by removing the PCI slot shield for the slot you wish to populate.
2. Fully seat the card into the riser card, pushing down with your thumbs evenly
on both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
For One CPU (CPU1) Installed
Branch 0 Branch 1
P1 DIMM1A P1 DIMM2A
For One CPU (CPU2) Installed
Branch 0 Branch 1
P2 DIMM1A P2 DIMM2A
For Two CPUs Installed
CPU1
Branch 1 Branch 2
P1-DIMM3A
5-10
Branch 2
P1 DIMM3A
Branch 2
P2 DIMM3A
CPU2
Branch 0 Branch 1
P2-DIMM1A P2-DIMM2A
Branch 2
P2-DIMM3A