Graphics Controller; Other Features; Server Chassis Features; System Power - Supero 1026T-6RF User Manual

Super micro - superserver+ barebone system
Table of Contents

Advertisement

gigabit Ethernet ports. The 1026T-6RFT+ (X8DTU-6TF+) includes two additional
10 Gb Ethernet ports.

Graphics Controller

The X8DTU-6TF+/X8DTU-6F+ features an integrated Matrox G200eW graphics
chip.

Other Features

Other onboard features that promote system health include onboard voltage moni-
tors, auto-switching voltage regulators, chassis and CPU overheat sensors, virus
protection and BIOS rescue.
1-3

Server Chassis Features

The 1026T-6RFT+/1026T-6F+ is built upon the SC119TQ-R700UB chassis. Details
on the chassis and on servicing procedures can be found in Chapter 6.The following
is a general outline of the main features of the chassis.

System Power

The SC119TQ-R700UB features a redundant 700W power supply consisting of
two power modules. The system does not need to be shut down when replacing or
removing a single power supply module.

Hard Drives

The SC119TQ-R700UB chassis was designed to support eight hot-swap SAS
hard drives.

PCI Expansion Slots

Two riser cards are included. The RSC-R1UU-E8R+ is located on the right side of
the chassis and supports one low-profi le PCI-E x4 card. The RSC-R1UU-2E8 is
located on the left side of the chassis and supports two PCI-E x8 add-on cards.
See section 5-6 of this manual for details.
Chapter 1: Introduction
1-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 1026t-6rft+

Table of Contents