Installing The Power Connector - Dell Latitude E6520 Owner's Manual

Dell - 15.6" latitude notebook - 2 gb memory - 320 gb hard drive
Hide thumbs Also See for Latitude E6520:
Table of Contents

Advertisement

7.
Remove the power connector trim.

Installing The Power Connector

1.
Align the power connector port trim in its original position.
2.
Tighten the screw to secure the power connector trim to the computer.
3.
Insert the power connector in its compartment.
4.
Install the power connector bracket in its place and tighten the screw to
secure its position.
5.
Connect the power connector to the system board.
6.
Connect and route the power connector cable.
base cover .
7.
Remove the
battery .
8.
Remove the
9.
Follow the procedures in
48
After Working Inside Your Computer .

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents