Connecting The System - Pioneer SPH-DA02 Operation Manual

Car receiver with appradio
Hide thumbs Also See for SPH-DA02:
Table of Contents

Advertisement

Connecting the system

Connecting the system
This product
(*1)
Control line cable
25 cm (9-7/8 in.)
25 cm (9-7/8 in.)
Wired remote input (SWC)
Please refer to the instruction manual for
the Hard-wired remote control adaptor
(sold separately).
(*1)
Make sure that the three yellow, green and blue connectors are attached before connecting the system.
WARNING
· To avoid the risk of accident and the potential violation of applicable laws, this product should never
be used while the vehicle is being driven except for navigation purposes.
· In some countries, the viewing of images on a display inside a vehicle even by persons other than the
driver may be illegal. Where such regulations apply they must be obeyed and this product's app-based
content should not be used.
Antenna jack
(RADIO ANT)
8.5 cm (3-3/8 in.)
8.5 cm (3-3/8 in.)
Microphone jack
(MIC)
3 m (9 ft. 10 in.)
Output cable
25 cm (9-7/8 in.)
Vehicle antenna
4 m (13 ft. 1 in.)
GPS antenna
iPhone or iPod touch (*2)
(*2)
For details concerning
operations and
compatibility, refer to
Important Information for
the User.
iPhone cable
1.7 m (5 ft. 7 in.)
Section
02
7
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sph-da01

Table of Contents