Setting The Alarm Clock - Sangean PR-D9W Operating Instruction

Setting the alarm clock

Your PR-D9W radio has two alarms which can each be set to wake you
to buzzer or AM/FM radio alarm. The alarms may be set while the unit
is in standby mode or while playing.
1. Before setting an alarm ensure that the clock time is set.
Press and hold one of the Alarm buttons as required, buzzer or radio,
until the radio beeps once to enter the setting and the alarm hour
digits will flash.
2. Press the Tuning Up or Down buttons to choose the alarm hour
and then press and release the according alarm button to enter the
hour setting. The alarm minute digits will then flash on the display.
3. Press the Tuning Up or Down buttons to choose the alarm minute
and then press and release the according alarm button to enter the
minute setting.
4. If the buzzer alarm is selected, the alarm volume setting will then
show on the display. Press the Tuning Up or Down buttons to adjust
the volume from 1-7 as required, then press and release the according
alarm button to confirm the setting.
5. If the radio alarm is selected, the radio band/frequency setting will
then show on the display. Press the Step/band button to choose the
band as required, and press the Tuning Up/Down buttons to adjust
the frequency as required. Press and release the according alarm
button to confirm the setting, and then the volume setting will show
on the display.
19
1,4-6
2-6
5