Setting Up The Projector; Video Setup; Standard Setup (Front Projection) - Sharp XG-SV200X Operation Manual

Setting Up the Projector

Video Setup

If using this projector outside the U.S.A., please change setting to "0 IRE" in Video Setup. (See
page 53.)
Setting Up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector's
feet fl at and level. Doing so will eliminate the need for Keystone correction and provide the best
image quality. (See pages

Standard Setup (Front Projection)

■
Place the projector at the required distance from the screen according to the desired picture
size. (See pages
Indication of the Projection Image Size and Projection Distance
XG-SV200X
(Example: 4:3 Signal Input (Normal Mode))
Picture Size
500" (1270 cm)
200" (508 cm)
100" (254 cm)
80" (203 cm)
60" (152cm)
XG-SV100W
(Example: 16:10 Signal Input (Normal Mode))
Picture Size
500" (1270 cm)
200" (508 cm)
100" (254 cm)
80" (203 cm)
60" (152cm)
18
31 to 33.)
19 and 20.)
Projection
Distance
Projection
Distance