HP D5970A - NetServer - LCII Configuration Manual page 7

Disk drives:
Fibre-channel cables
HP Rack Stoarge/12
Number of cabinets:
Status SCSI ID
Disk SCSI IDs
Disk drives:
Cables
Hub
Model
Quantity
LANs
LAN connection
NIC:
Model
Driver
No. of NICs
SPU I\O slot
HP 9.1 GB Ultra SCSI Disk Module D6106A
HP 9.1 GB Ultra SCSI Disk Module D6107A
HP 18.2 GB Ultra SCSI Disk Module D6108A
HP 18.2 GB (10k rpm) Ultra SCSI Disk Module D7031A
HP 18.2 GB (7200 rpm) Low Profile Ultra SCSI Disk Module D7174A
HP 36.4 GB (10k rpm) Ultra SCSI Disk Module D8210A
Optical (Server to Hub only):
50 meter D6980A
100 meter D6981A
Copper (Shared Storage to Hub and Server to Hub ):
3 meter D6978A
5 meter D6979A
10 meter D7080A
(Optional)
1 – 2
5 (fixed)
0 – 3, 8 – 15 (fixed)
Same as HP Rack Storage/12FC
Any HP LVD SCSI cables from the following list:
1 meter D7131A
2.5 meter D6020A
5 meter D6982A
10 meter D6983A
Only required for Duplex FCArray Card configuration.
HP D6976A 6-port fibre channel
1
Intra-cluster (Heartbeat) LAN
HP D5954A crossover cable or
equivalent
The intra-cluster LAN may only be
used for cluster node communication
via a crossover cable. It may not be
used for client communication.
HP D5013A/B (10/100TX PCI)
3.27.00.0001 or later
1
P4
3
Client LAN
Any LAN
Any that is on both the HP Tested
Products List and the Microsoft
Hardware Compatibility List.
Any driver
NOTE
If the Client and Intra-
cluster LANs are the same model
the Client LAN must use the same
driver as the Intra-cluster LAN.
1 minimum
P2