Choosing Multiboot Preferences; Setting A New Boot Order In Computer Setup; Dynamically Choosing A Boot Device Using The F9 Prompt - HP ProBook 4440s User Manual
Hp notebook user guide - linux
Hide thumbs
Also See for ProBook 4440s:
- Specification (37 pages) ,
- Maintenance and service manual (174 pages) ,
- Getting started manual (67 pages)
Table of Contents
Advertisement
Choosing MultiBoot preferences
You can use MultiBoot in the following ways:
●
To set a new boot order that the computer uses each time it is turned on, by changing the boot
order in Computer Setup.
●
To dynamically choose the boot device, by pressing
Startup Menu" message is displayed at the bottom of the screen, and then pressing
the Boot Device Options menu.
●
To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device
each time the computer is turned on or restarted.
Setting a new boot order in Computer Setup
To start Computer Setup and set a boot device order that the computer uses each time it is turned on
or restarted, follow these steps:
1.
Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select the Legacy Boot Order list, and then press
enter.
4.
To move the device up in the boot order, use a pointing device to click the up arrow, or press the
+
key.
– or –
To move the device down in the boot order, use a pointing device to click the down arrow, or
press the
5.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Dynamically choosing a boot device using the f9 prompt
To dynamically choose a boot device for the current startup sequence, follow these steps:
1.
Open the Select Boot Device menu by turning on or restarting the computer, and then pressing
esc
while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the
screen.
2.
Press f9.
3.
Use a pointing device or the arrow keys to select a boot device, and then press enter.
Your changes go into effect immediately.
84
Chapter 13 MultiBoot
f10
to enter Computer Setup.
-
key.
esc
while the "Press the ESC key for
esc
while the "Press the ESC key for Startup
f9
to enter
Hide quick links:
Advertisement
Table of Contents
