Using Optical Drives (Select Models Only); Identifying The Installed Optical Drive; Inserting An Optical Disc; Tray-Load - HP ProBook 4440s User Manual
Hp notebook user guide - linux
Hide thumbs
Also See for ProBook 4440s:
- Specification (37 pages) ,
- Maintenance and service manual (174 pages) ,
- Getting started manual (67 pages)
Table of Contents
Advertisement
6.
Turn the computer right-side up, and then reconnect AC power and external devices to the
computer.
7.
Turn on the computer.
Using optical drives (select models only)
Identifying the installed optical drive
▲
Select Computer > More Applications, and then select Audio & Video in the left pane.
A list of all the devices installed in your computer, including your optical drive, is displayed.
Inserting an optical disc
Tray-load
1.
Turn on the computer.
2.
Press the eject button (1) on the drive bezel to release the disc tray.
3.
Pull out the tray (2).
4.
Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up
over the tray spindle.
NOTE:
5.
Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6.
Close the disc tray.
NOTE:
After you insert a disc, a short pause is normal. If you have not selected a media player, an
AutoPlay dialog box opens. It prompts you to select how you want to use the media content.
If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
Using optical drives (select models only)
57
Hide quick links:
Advertisement
Table of Contents
