Using the optional security screw
Use the optional security screw to lock the service door to the bottom of the computer. When not in
use the security screw can be stored inside the battery bay.
To use the security screw:
1.
Remove the battery.
CAUTION:
of information. To prevent loss of information, save your work and initiate Hibernation or shut
down the computer through the operating system before removing the battery.
2.
Remove the security screw from inside the battery bay (1) and insert it into the service door (2)
to lock the service door in place.
Removing or replacing the service door
CAUTION:
Save your work and shut down the computer before adding or replacing a memory module or hard
drive.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
50
Chapter 7 Drives
Removing a battery that is the sole power source for the computer can cause loss
To prevent information loss or an unresponsive system: