Reconnect Devices; Disconnect Devices; Edit The Device Name; Smartactions - Motorola PHOTON Q 4G LTE User Manual

5. If necessary, touch OK, or enter the device passkey (like 0000) to connect to the device.
When the device is connected, the Bluetooth indicator
Note: Using a mobile device or accessory while driving may cause distraction and may be
illegal. Always obey the laws and drive safely.
NFC Method
You can also use Near Field Communication (NFC) to pair an NFC enabled Bluetooth device to
your phone.
1. To turn NFC on, touch Apps
2. Make sure your phone's screen is on, and then touch the Bluetooth device to your
phone's NFC tag location, which is located on the back of your phone. Hold the device to
the phone until pairing is complete.

Reconnect Devices

Once you have paired a Bluetooth device with your phone reconnecting it is simple.
► To automatically reconnect your phone with a paired device, simply turn on the device.
► To manually reconnect your phone with a paired device, touch the device name in the
Bluetooth devices list.

Disconnect Devices

When you are not using a Bluetooth device, you can disconnect it from your phone.
► To automatically disconnect your phone from a paired device, simply turn off the device.
► To manually disconnect your phone from a paired device, touch the device name in the
devices list, and then touch OK.

Edit the Device Name

You can change the device name for your phone.
► Touch Apps
name and touch OK.

SMARTACTIONS

Tired of doing the same tasks over and over again? Let SMARTACTIONS
You can create rules to do things like automatically dim the touch screen when the battery is
low, set your ringer to vibrate at work, and set different wallpaper at home.
► Touch Apps
Tools and Calendar
>
> Settings > Bluetooth > Menu > Rename phone. Enter a
> Smart Actions
appears in the status bar.
Settings > More... > NFC.
93
TM
do them for you.