Reconnect Devices; Disconnect Devices; Rename The Phone; Rename A Paired Device - Motorola moto e User Manual

5. If necessary, tap OK or Pair, or enter the device passkey (like 0000) to connect to the device.
When the device is connected, the Bluetooth indicator a ppears in the status bar.
Note: Using a mobile device or accessory while driving may cause distraction and may be illegal.
Always obey the laws and drive safely.

Reconnect Devices

Once you have paired a Bluetooth device with your phone reconnecting it is simple.
To automatically reconnect your phone with a paired device, simply turn on the device.
n
To manually reconnect your phone with a paired device, tap the device name in the Bluetooth
n
devices list.

Disconnect Devices

When you are not using a Bluetooth device, you can disconnect it from your phone.
To automatically disconnect your phone from a paired device, simply turn off the device.
n
To manually disconnect your phone from a paired device, tap the device name in the devices list,
n
and then tap OK.

Rename the Phone

You can change the device name for your phone.
From home, tap Apps
n
existing name, or enter a new name, then tap Rename.

Rename a Paired Device

You can change the name of a device paired to your phone.
1. From home, tap Apps
2. Tap the device name and then tap Rename.
3. Edit the existing name or enter a new name, then tap OK.

Connect Your Phone to Your Computer

You can connect your phone to a computer by using a USB cable.
Note: The first time you use a USB connection, your computer may indicate that drivers are being
installed. Follow any prompts you see to complete the installation. This may take a few minutes.
1. Connect a Motorola micro USB data cable from your phone's micro USB port to a USB port on
your computer. Your phone should show
Connectivity
> Settings > Bluetooth > > Rename this device. Edit the
> Settings > Bluetooth.
90