Solving Option Problems; Option Does Not Operate Correctly Or Quits After It Is Installed; Paper Trays - Lexmark T656 User Manual

Troubleshooting

Solving option problems

Settings chosen from the software program or application can change or override settings chosen from the printer
control panel. If an option is not functioning, then make sure it is selected in the software as well as the printer control
panel.

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
C
HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER
1
Turn the printer off.
2
Unplug the printer.
3
Check the connection between the option and the printer.
M
AKE SURE THE OPTION IS INSTALLED CORRECTLY
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, then reinstall it. For more information, see the hardware setup documentation that came with the option, or
see the latest comprehensive User's Guide available on our Web site at www.lexmark.com/publications.
M
AKE SURE THE OPTION IS SELECTED
From the computer you are printing from, select the option. For more information, see "Updating available options
in the printer driver" on page 43.

Paper trays

These are possible solutions. Try one or more of the following:
M
AKE SURE THE PAPER IS LOADED CORRECTLY
1
Open the paper tray.
2
Check for paper jams or misfeeds.
3
Make sure paper guides are aligned against the edges of the paper.
4
Make sure the paper tray closes properly.
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
175