Printing A Menu Settings Page; Printing A Network Setup Page; Setting Up The Printer Software; Installing Printer Software - Lexmark T656 User Manual

Additional printer setup

Printing a menu settings page

Print a menu settings page to review the current menu settings and to verify printer options are installed correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings page lists all the factory
default settings. Once you select and save other settings from the menus, they replace the factory default settings as
user default settings. A user default setting remains in effect until you access the menu again, choose another value,
and save it. To restore the factory default settings, see "Restoring the factory default settings" on page 169.
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
3
Touch Reports.
4
Touch Menu Settings Page.
The menu settings page prints and the printer returns to the home screen.

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page
also provides important information that aids network printing configuration.
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
3
Touch Reports.
4
Touch Network Setup Page.
The network setup page prints and the printer returns to the home screen.
5
Check the first section on the network setup page, and confirm that Status is "Connected."
If Status is "Not Connected," then the LAN drop may not be active, the network cable may be malfunctioning, or,
if you have a wireless printer model, the wireless network may not be configured properly. Consult a system support
person for a solution, and then print another network setup page.

Setting up the printer software

Installing printer software

A printer driver is software that lets the computer communicate with the printer. The printer software is typically
installed during the initial printer setup. If you need to install the software after setup, follow these instructions:
For Windows users
1
Close all open software programs.
2
Insert the Software and Documentation CD.
3
From the main installation dialog, click Install.
4
Follow the instructions on the screen.
.
.
42