HP Z210 Series Rack Mounting Instructions page 5

3.
To install the workstation on the tray:
a. Guide the front bezel of the workstation under the lip of the adapter bracket (1).
b. Rotate the back of the workstation down onto the tray (2).
c.
Tighten the single, black rear captive screw (3), to secure the rear of the workstation into the
tray.
Figure 4
Step 4—Loading the workstation-tray assembly into
the rack
To load the assembly into the rack:
1.
Place the rear of the workstation-tray assembly on the rail-bracket shelf (1).
ENWW
Installing the workstation on the tray
Step 4—Loading the workstation-tray assembly into the rack
5