HP Xw6600 - Workstation - 2 GB RAM Installation Manual page 6

2. To install the processor:
a. Remove the plastic cover from the processor.
b. Align the notches in the processor base with the tabs on the socket.
c. Seat the processor into the socket. Ensure that the processor is level with the socket.
Figure 2
3. Close the processor cover plate. Lightly press down on the processor cover plate while closing the
socket lever.
CAUTION:
the heatsink attached. Damage to the processor or the processor socket may result.
6 Second Intel® Xeon® processor installation
Installing the processor
After installing the processor in the socket, do not power up the workstation without
ENWW