HP Xw6600 - Workstation - 2 GB RAM Installation Manual page 10

d. Fully tighten the remaining pair
e. Tighten all screws to 6 inch-lbs of torque.
Figure 7
Installing the processor heatsink in the HP xw Workstation series
CAUTION:
fan.
1. Remove and discard the thermal grease protective liner from the underside of the new heatsink,
and then set the heatsink over the processor.
NOTE:
10 Second Intel® Xeon® processor installation
Tightening the heatsink screws
Ensure that the second heatsink does not crush the electrical wires of the first heatsink
Do not touch the exposed thermal grease when handling the processor heatsink.
.
2
ENWW