Step 3—Reassembling The Computer; Step 4—Configuring The Software - HP Xw4600 - Workstation - 2 GB RAM Installation Manual

Step 3—Reassembling the computer
1. Reinstall the side access panel.
2. Reconnect power to the computer and all external devices.
3. Restore power to the computer and all external devices.
Step 4—Configuring the software
1. After restoring power to the computer, install the graphics drivers from the CD included in the kit.
NOTE:
designated for your computer model and operating system. Obtain updates from
http://www.hp.com/support.
2. Using a supplied video cable adapter appropriate for the monitor, attach one end of the cable
adapter to the interface connector on the graphics card, and the other end to the monitor.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/manuals, then select your
product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。http://www.hp.com/support/manuals
し、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニューから
Japanese を選択してください。
6 PCI Express graphics card installation
At the time of component installation, look for device firmware and driver updates,
にアクセス
ENWW