Step 2—Installing The Graphics Card - HP Xw4600 - Workstation - 2 GB RAM Installation Manual

Step 2—Installing the graphics card
To install the graphics card:
NOTE: If the computer has a card guide integrated into the chassis, omit the first step.
1. (Optional) If a card guide was included with the kit, lower it into the chassis and snap it into
place. The following figure shows two graphics card guide types.
Figure 2
2. To install the PCIe graphics expansion card:
a.
b.
c.
4 PCI Express graphics card installation
Installing the card guide (Optional)
If the PCIe graphics expansion card fits in a card guide, lower the card into the chassis and
align the card in the groove of the card guide.
NOTE: For long cards, rotate the graphics card bulkhead under the rear chassis lip, and
then align the card extender with the card guide, while lowering it into the slot.
Figure 3 Aligning and installing a long graphics card
Verify that the keyed components of the card align with the slot (1).
Close the expansion slot retention clamp (2).
ENWW