HP Xw4400 - Workstation - 2 GB RAM Hardware Manual page 10

be part of the RAID array. Select from the available disks those disks that will be part of the RAID array
and click "Accept DG" to proceed.
Figure 11 LSI WebBIOS – Configuration of disk group
Step 5: The next screen allows for more advanced configuration of the RAID array. Many details about
the disk policies can be selected here. The most important options on this screen are the RAID level
and size. First select the RAID level from the drop-down menu- the RAID levels available will vary
depending on the number of physical disks in the disk group. The configuration window to the right of
the screen will display information on the maximum size of the RAID array for the different available
RAID levels. In the text box labeled "Select Size," enter a size in MB up to this available maximum size.
When these options have been selected, further customization can be done, or click "Accept" or "Next"
to move to the next step of configuration.
10 Installing and Configuring SAS Hardware RAID on HP Workstations ENWW