HP Xw4400 - Workstation - 2 GB RAM Hardware Manual page 7

Step 6: After an array has been created, the utility gives options for managing it through the "View
Existing Array" menu. Viewing the array will display various properties of the RAID array, including the
disks present and their status.
Figure 6 LSI Logic MPT Setup Utility – View array
Step 7: Select the "Manage Array" option and press enter to use the utility's management features.
From here, the disks that are configured to be hot spares can be managed, the array can be activated,
deactivated, or deleted, and if the array is not at an "Optimal" status due to a disk failure or other problem,
it can be synchronized from this menu.
Figure 7 LSI Logic MPT Setup Utility – Manage array
ENWW LSI 3041E and Integrated LSI 1064/1068 Setup 7