Connecting To A Novell Netware 5.0 Server; Microsoft Windows 95 Sr2.5; Requirements - HP VL600 - Vectra - 128 MB RAM Installation Manual

Microsoft Windows 95
SR2.5

Connecting to a Novell NetWare 5.0 Server

Microsoft Windows 95 SR2.5

2 Connecting to a Novell NetWare 5.0 Server

Requirements

Operating System
Driver Version
Driver File
Server OS
Client OS
Procedure
1 With the HP Vectra turned off, install the network adapter into a PCI slot.
2 Connect the network cable to the newly installed network adapter.
3 Power on the machine and boot to Windows 95.
4 Windows 95 will detect the network adapter as "PCI Token-Ring
Controller".
5 Insert the driver disk and click on "Next" to continue the installation.
6 When Windows 95 detects the updated driver, "IBM PCI Token-Ring
Adapter", click on "Finish".
7 Click on "OK" when Windows prompts for the driver disk.
8 Type in the location of the driver disk and click on "OK".
9 Click on "Yes" to keep the existing files.
10 Remove the driver disk and click on "Yes" to restart the system.
11 After restarting the system, additional changes in the network properties,
such as: workgroup name, computer name, etc. may be necessary. Ask
your Network Administrator for more information. Restart the system if
changes are made.
12 From the location of the "Novell Client v3.1 for Windows 95/98"
installation files, execute "Setup.exe".
4
Windows 95 SR2.5
5.12.00.0040
Ibmtrp.sys
Novell NetWare 5.0 Server
Client v3.1 for Windows 95/98