HP Vectra XA 5/xxx User Manual page 46

CAUTION
2 How to Install Accessories In Your PC
Installing an OverDrive Processor
6 To install the new processor:
a Locate the corner markers:
on the processor—a dot or notch ("broken" corner)
•
on the processor socket—a dot.
•
b Position the processor over the socket, with it's corner marker
facing the corner marker on the socket.
c Place the processor into the socket.
d Lower the lever to lock the processor into place.
e Replace the heatsink and fasten the clip, if the heatsink is not
directly attached to the processor.
Do not change the system board switches after you install an OverDrive
processor processor.
7 Replace the PC's cover. Reconnect all cables and power cords.
36 English