HP Vectra VL800 Installation Manual page 7

13. Additional changes in the Network properties, such as: workgroup name,
computer name, TCP/IP properties, etc. may be necessary. Ask your Network
Administrator for more information.
14. The NetBEUI protocol can not be used. The installation of the NetBEUI protocol
for each port registers the computer name twice in the same workgroup. In
Windows, computers can not have the same name within a workgroup. Under
the Protocols tab, select the NetBEUI Protocol and click on the Remove button.
15. Click on "Close" to complete the installation.
16. Remove the driver disk and click on "Yes" when prompted to restart your
computer.
17. Logon to Windows with administrator privileges and re-install the current service
pack.