HP Vectra VL800 Installation Manual page 5

14. The NetBEUI protocol can not be used. The installation of the NetBEUI protocol
for each port registers the computer name twice in the same workgroup. In
Windows, computers can not have the same name within a workgroup. Under
the Protocols tab, select the NetBEUI Protocol and click on the Remove button.
15. Click on "Close" to complete the installation.
16. Remove the driver disk and click on "Yes" when prompted to restart your
computer.
17. Logon to Windows with administrator privileges.
18. From the location of the "Novell Client v4.80 for Windows NT/2000" installation
files, execute "SETUPNW.EXE".
19. Select either "Typical" or "Custom" and click on "Install". Typical Installation is
normally chosen. Select Custom Installation only if you are an administrator or an
advanced user. When prompted for options during installation, ask your Network
Administrator for more information.
20. Click on "Yes" to agree with the Novell Terms and Conditions to proceed with the
installation.
21. Click on "Reboot" to restart the system once the installation is complete.
22. Logon to Windows with administrator privileges and re-install the current service
pack.