Table of Contents
Advertisement
Camera module
Description
Camera module
Before removing the camera module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Optical drive (see
b.
Keyboard (see
c.
Keyboard cover (see
d.
Speaker assembly (see
e.
Display assembly (see
Remove the camera module:
1.
Disconnect the cable (2) and remove the camera module from the display enclosure.
2.
Release the camera module (1) from the display enclosure.
Reverse this procedure to install the camera module.
Battery on page
34).
Optical drive on page
Keyboard on page
44)
Keyboard cover on page
Speaker assembly on page
Display assembly on page
35)
46)
49)
51)
Component replacement procedures
Spare part number
487287-001
57
Advertisement
Table of Contents
