HP Presario CQ36-100 - Notebook PC User Manual page 44

Function
Initiate Sleep.
Initiate QuickLock.
34 Chapter 3 Pointing devices and keyboard
Hotkey
fn+f5
fn+f6
Description
Most external monitors receive video information from the
computer using the external VGA video standard. The
hotkey can also alternate images among other devices
receiving video information from the computer.
The following video transmission types, with examples of
devices that use them, are supported by the
● LCD (computer display)
●
External VGA (most external monitors)
●
S-Video (televisions, camcorders, DVD players, VCRs,
and video capture cards with S-Video-in jacks)
●
HDMI (televisions, camcorders, DVD players, VCRs,
and video capture cards with HDMI ports)
● Composite video (televisions, camcorders, DVD
players, VCRs, and video capture cards with composite-
video-in jacks)
NOTE: Composite video devices can be connected to
the system only by using an optional docking device or
expansion product.
CAUTION: To reduce the risk of information loss, save your
work before initiating Sleep.
When Sleep is initiated, your information is stored in system
memory, the screen is cleared, and power is conserved.
While the computer is in the Sleep state, the power lights
blink.
The computer must be on before you can initiate Sleep.
NOTE: If a critical battery level occurs while the computer
is in the Sleep state, the computer initiates Hibernation and
the information stored in memory is saved to the hard drive.
The factory setting for critical battery action is Hibernate, but
this setting can be changed using Power Options in Windows
Control Panel.
To exit Sleep, briefly press the power button.
The function of the fn+f5 hotkey can be changed. For
example, you can set the fn+f5
instead of Sleep.
NOTE: In all Windows operating system windows,
references to the sleep button apply to the
The QuickLock security feature protects your information by
displaying the operating system Log On window. While the
Log On window is displayed, the computer cannot be
accessed until a Windows user password or a Windows
administrator password is entered.
NOTE: Before you can use QuickLock, you must set a
Windows user password or a Windows administrator
password. For instructions, refer to Help and Support.
To use QuickLock, press fn+f6
and lock the computer. Then follow the on-screen instructions
fn+f4
fn+f4 hotkey:
hotkey to initiate Hibernation
fn+f5 hotkey.
to display the Log On window