Table of Contents
Advertisement
10.
Insert a memory module in the expansion memory slot:
a.
Align the notched edge (1) of the memory module with the tab in the memory module slot.
CAUTION:
edges only. Do not touch the components on the memory module, and do not bend the
memory module.
b.
With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module (2) into the memory module slot until it is seated.
c.
Gently press the memory module (3) down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
11.
Align the tabs (1) on the memory module compartment cover with the notches on the computer.
12.
Close the cover (2).
13.
Tighten the 3 memory module compartment cover screws (3).
To prevent damage to the memory module, hold the memory module by the
Adding or replacing memory modules
93
Advertisement
Table of Contents
Troubleshooting
