Setting Passwords In Setup Utility; Administrator Password - HP Presario CQ36-100 - Notebook PC User Manual

Setting passwords in Setup Utility

Password

Administrator password*

Power-on password*
*For details about each of these passwords, refer to the following topics.
Administrator password
Your administrator password protects the configuration settings and system identification information in
Setup Utility. After this password is set, you must enter it each time you access Setup Utility.
Your administrator password is not interchangeable with an administrator password set in Windows,
nor is it displayed as it is set, entered, changed, or deleted. Be sure that you record your password and
store it in a safe place.
If you enter the administrator password at the first password check before the "Press the ESC key for
Startup Menu" message is displayed, you do not have to enter it again to access Setup Utility.
If you enter the power-on password at the first password check before the "Press the ESC key for Startup
Menu" message is displayed, you must enter the administrator password to access Setup Utility.
100 Chapter 10 Security
Function
● Protects access to Setup Utility.
●
After this password is set, it must be entered each time
you access Setup Utility.
CAUTION: If you forget your administrator password, you
cannot access Setup Utility.
● Protects access to the computer contents.
●
After this password is set, it must be entered each time
you turn on or restart the computer, or exit Hibernation.
CAUTION: If you forget your power-on password, you
cannot turn on or restart the computer, or exit Hibernation.
NOTE: The administrator password can be used in place of
the power-on password.