4.
Click on a remote server, and then click Next.
5.
Select FTP or HTTP protocol. Type the remote server information in the fields.
NOTE:
6.
Click Finish.
The HP ThinPro configuration restoration is complete.
Capture an HP ThinPro Configuration to a USB Drive
1.
Attach a USB key to the thin client.
2.
Click Control Panel > Management > Thinstate.
3.
Select the HP ThinPro configuration, and then click Next.
4.
Select save the configuration, and then click Next.
5.
Click on a USB key, and then click Next.
124 Chapter 2 Installation
Username and Password are not required if you are using HTTP protocol.
ENWW