HP t5745 - Thin Client Administrator's Manual page 106

To edit a wired connection:
1. Click the Wired tab.
2. Select the connection you want to change and click Edit.
3. Change setting by revising the information on the three tabs:
●
●
●
4. Click Apply to apply your settings and close the dialog box.
To delete a wired connection:
1. Click the Wired tab.
2. Select the connection you want to remove and click Delete.
3. Click Delete to confirm that you want to delete the connection.
4. Click Close to close the dialog box.
98 Chapter 2 Installation
Wired
802.1x Security
IPv4 Settings
ENWW