Service Considerations; Tool And Software Requirements - Compaq Presario 1600 - Notebook PC Maintenance And Service Manual

MSG Index | Home Page
Illustrated Parts Catalog

Service Considerations

Listed below are some of the considerations that you should keep in mind
during the disassembly and reassembly of the computer.

Tool and Software Requirements

To service the computer, you need the following:
Compaq screwdriver kit (Spare Part No. 161946-001)
Torx T-9 screwdriver
3/16-inch and 5mm nut drivers (for screwlocks and standoffs)
Small, standard screwdriver
Small, Phillips screwdriver
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect
screw is used during the reassembly process, it can damage the unit. Compaq
strongly recommends that all screws removed during disassembly be kept
with the part that was removed, then returned to their proper locations.
As each subassembly is removed from the computer,
IMPORTANT: it should be placed away from the work area to
prevent damage.
Return to Removal & Replacement Procedures
Maintenance & Service Guide
Presario 1660 Model
| Notice | Preface
| Removal & Replacement Procedures
Pin Assignments
| Product Description
| Battery Pack Operations
| Troubleshooting
| Specifications