Removing The Processor - Compaq Presario 1600 - Notebook PC Maintenance And Service Manual

MSG Index |
Illustrated Parts Catalog

Removing the Processor

Electrostatic
Discharge
Service
Consideration
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Assembly
Keyboard and
Heatspreader
Processor
Hard Drives
Upper CPU
Cover
DVD Drive
Battery
Charger
Board
Modem
Display Panel
Assembly
Speaker
Assembly
Diskette
Drive
Fan Assembly
System
Board
Memory
Module
Maintenance & Service Guide
Presario 1660 Model
Home Page | Notice
| Removal & Replacement Procedures
Pin Assignments
| Preface | Product Description
| Battery Pack Operations
| Troubleshooting
| Specifications
To remove the
processor,
complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest
assembly.
3. Remove the
keyboard and
heatspreader.
4. Rock the
processor back
and forth just a
little until it
comes out of
the processor
chassis slot.
To reinsert the
processor:
Align the screw
holes (on the
processor)
nearest the
speakers with the
corresponding
screw sockets on
the system board,
then push the
processor in
carefully but
firmly.
CAUTION:
If the
processor
is not
correctly
aligned
with the
socket,
the
connectors
on either
the
processor
or the
system
board will
be bent
out of
alignment.
The
processor
or board
will then
be
destroyed,
and will
need to be
replaced.