C
Mounting the Thin Client
HP Quick Release
This thin client incorporates four mounting points on the bottom of the unit. These mounting points
follow the VESA (Video Electronics Standards Association) standard, which provides industry-
standard mounting interfaces for Flat Displays (FDs), such as flat panel monitors, flat displays, and
flat TVs. The HP Quick Release connects to the VESA-standard mounting points, allowing you to
mount the thin client in a variety of orientations.
NOTE:
When mounting to a thin client, use the 10 mm screws supplied with the HP Quick Release.
Figure C-1
To use the HP Quick Release:
1.
Using four 10 mm screws included in the mounting device kit, attach one side of the HP Quick
Release to the thin client as shown in the following illustration.
Figure C-2
8
Appendix C Mounting the Thin Client
HP Quick Release
Connecting the HP Quick Release to the thin client
ENWW