Appendix C Mounting The Thin Client; Hp Quick Release - HP t5145 Hardware Reference Manual

C Mounting the Thin Client

HP Quick Release

If your thin client does not have VESA mounting holes, you must obtain and install the optional side
panels with VESA mounting holes and HP Quick Release. To order, visit the HP Web site at
http://www.hp.com
This thin client incorporates four mounting points on each side of the unit. These mounting points follow
the VESA (Video Electronics Standards Association) standard, which provides industry-standard
mounting interfaces for Flat Displays (FDs), such as flat panel monitors, flat displays, and flat TVs. The
HP Quick Release connects to the VESA-standard mounting points, allowing you to mount the thin client
in a variety of orientations.
NOTE: When mounting to a thin client, use the 10 mm screws supplied with the HP Quick Release.
Figure C-1
22

Appendix C Mounting the Thin Client

and search for your specific thin client model.
HP Quick Release