HP t5335 - Thin Client Hardware Reference Manual page 15

2. Using four screws included in the mounting device kit, attach the other side of the HP Quick
Release to the device to which you will mount the thin client. Make sure the release lever points
upward.
Figure C-3
3. Slide the side of the mounting device attached to the thin client (1) over the other side of the
mounting device (2) on the device on which you want to mount the thin client. An audible 'click'
indicates a secure connection.
Figure C-4
NOTE: When attached, the HP Quick Release automatically locks in position. You only need to
slide the lever to one side to remove the thin client.
CAUTION:
components, make sure both the release lever on one side of the mounting device and the rounded
opening on the other side face upward.
ENWW
Connecting the HP Quick Release to another device
Connecting the thin client
To ensure proper function of the HP Quick Release and a secure connection of all
HP Quick Release
9