Chapter 2. Setting Up Your Computer - IBM NetVista A21 Quick Reference

Quick reference for netvista 2254, 2256, 2257, 6336, 6337, 6339, 6341, 6342, 6346, 6347, and 6348 systems (english)
Hide thumbs Also See for NetVista A21:
Table of Contents

Advertisement

Chapter 2. Setting up your computer

Note: Your computer might not have all of the connectors that are described in
this chapter.
Use the following information when setting up your computer. Look for the
small connector icons on the back of your computer.
If your computer cables and connector panel have color-coded connectors,
match the color of the cable end with the color of the connector. For example,
match a blue cable end with a blue connector, a red cable end with a red
connector.
1. Check the position of the voltage-selection switch on the rear of the
computer. Use a ballpoint pen to slide the switch, if necessary.
v If the voltage supply range is 90–137 V ac, set the switch to 115 V.
v If the voltage supply range is 180–265 V ac, set the switch to 230 V.
2. Your keyboard cable might have a standard keyboard connector 1 or a
Universal Serial Bus (USB) connector 2 . Connect the keyboard cable to
the appropriate keyboard connector.
3. Your mouse cable might have a standard mouse connector 1 or a USB
connector 2 . Connect the mouse cable to the appropriate mouse
connector.
© Copyright IBM Corp. 2001
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netvista a22Netvista a22

Table of Contents