Taking Pictures Using The Built-In Flash; Switching To The Appropriate Flash Setting - Panasonic DMCFZ100K Operating Instructions Manual

[REC] Mode:

Taking Pictures using the Built-in Flash

A To open the flash
Press the flash open button.
B To close the flash
Press the flash until it clicks.
•
Be sure to close the flash when not in use.
•
The flash setting is fixed to [Œ] while the flash
is closed.
Note
•
Be careful not to catch a finger when closing a flash bulb.
Set the flash to match the recording.
•
Open the flash.
Select [FLASH] in the [REC] mode menu.
Press 3/4 to select a mode and press
[MENU/SET].
•
For information about flash settings that can be selected, refer
"
to Available flash settings by Recording Mode
Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to finish.
Advanced (Recording pictures)

Switching to the appropriate flash setting

(P28)
"
. (P71)
- 69 -